ALFA Finder India's fastest NSE & BSE filing alerts on Telegram, filtered to the stocks you hold Telegram alerts alfafinder.com →
Thursday, 19 November 2026 NSE & BSE filings, as they land
ALFA News Straight from the exchange filing
Earning Call

Millworks Technologies Targets ₹200 Cr FY27 Revenue Amid ₹86.88 Cr Receivable Audit Hurdle

Millworks Technologies reported a standalone net loss of ₹1.83 crore for H1 FY27 on revenue of ₹17.37 crore, attributed to timing slippages in defence order accounting. The company's auditors issued a qualified opinion regarding ₹86.88 crore in outstanding receivables from QuickPay, which management expects to recover by December 2026.

Black and white close-up of an industrial lathe machine showing its intricate mechanical details. Stock photo illustrating Millworks Technologies' earning call story.
Photo: Tima Miroshnichenko / Pexels
Key numbers
H1 Revenue ₹17.37 CrH1 FY27
Order Book ₹230 Cr1.5x Annual Rev
Market Cap ₹1,298.83 CrBSE: 544826
Inventory ₹28.34 CrUp 147% from Mar

Key highlights

  • H1 FY27 revenue reached ₹17.37 crore with a standalone EBITDA of ₹1.81 crore
  • Inventory jumped to ₹28.34 crore from ₹11.47 crore in March 2026, reflecting goods awaiting inspection
  • Order book stands at ₹230 crore, featuring a landmark ₹111 crore export order from a global defence major
  • Auditors flagged ₹86.88 crore due from QuickPay Private Limited, outstanding for over six months
  • Company aims for ₹200 crore revenue in FY27 and sets a long-term target of ₹300 crore for FY28

Defence Accounting Timing Leads to H1 Shortfall

Millworks Technologies management clarified that the H1 FY27 revenue of ₹17.37 crore was lower than internal projections due to approximately ₹30 crore worth of orders executed in September but billed in October. Under applicable accounting standards, revenue is recognized only when risks and rewards pass to the customer, which in defence contracts is often linked to final regulatory inspections. Consequently, inventory surged to ₹28.34 crore as of September 30, 2026, as goods were physically ready but remained on the balance sheet at cost.

Management indicated that FY27 performance will remain heavily weighted toward the second half, consistent with historical trends where 70% of revenue typically flows in H2.

Audit Qualification and QuickPay Receivables

  • Auditors qualified the H1 FY27 results over ₹86.88 crore in receivables from QuickPay Private Limited
  • The outstanding amount has been pending for over 6-8 months, exceeding typical credit cycles
  • Management attributed the delay to slow government approval processes for a major Indian defence project
  • Approximately 70% of the total stuck receivables are linked to a single domestic defence order
  • The company expects approval-linked customer collections to materialize in December 2026
  • Company maintains an 8% stake in QuickPay, which currently holds an order for 960 loitering munition drones

Export Growth and Build-to-Spec Strategy

A significant pivot is underway as Millworks shifts focus from 'build-to-print' toward higher-margin 'build-to-spec' projects. The order book now includes a ₹111 crore export contract, the largest in the company's history. To support this, Millworks has integrated a metal 3D printing facility which has reduced prototype development timelines from three months to just four weeks.

Management targets increasing the share of build-to-spec orders to 50% in the near term, as these typically command 3% to 5% higher margins compared to standard machining work. The company is also undergoing audits from major European aerospace firms to transition from a Tier-2 to a Tier-1 supplier.

Millworks Technologies · share price, past month

Management on Operational Slog

The work was done, the goods were made, and they were moved to the customer; only the accounting date sits on the other side of 30th September.

— Sridhar Acharya, Managing Director, Millworks Technologies Ltd

Unit 4 Expansion and Future Capacity

  • Unit 4 expansion is ongoing with 27 out of 52 planned CNC machines installed as of September 2026
  • The remaining 25 machines are scheduled for commissioning throughout the remainder of FY27
  • A new anodising plant for special processes like passivation is set for January 2027 operations
  • Company spent ₹28.73 crore on machinery during H1 FY27 using IPO proceeds
  • Debt-to-equity ratio remains low at 0.15x, providing headroom for larger project execution
  • Fixed costs including employee expenses of ₹4.46 crore were fully absorbed despite lower H1 billing
Recent quarters and guidance
DateAnnouncementAmount
13 Nov 2026H1 FY27 standalone revenue from operationsSource: stocksigma.ai₹17.37 Cr
13 Nov 2026H1 FY27 standalone EBITDASource: insights.dsij.in₹1.81 Cr
13 Nov 2026H1 FY27 standalone net lossSource: insights.dsij.in₹-1.83 Cr

What to watch next

  • Resolution of ₹86.88 crore QuickPay receivables expected by the end of December 2026
  • Operational launch of the anodising facility in January 2027 to internalize special processes
  • Final commissioning of 25 pending CNC machines at Unit 4 by March 2027
  • Potential supplier status upgrade to Tier-1 following audits by global aerospace majors in February 2027

“Our business has always been weighted towards the second half traditionally. Last year about 70% of our revenue from operations came in H2.”

— Sridhar Acharya, Managing Director

“I will give you some good news in December regarding the QuickPay receivables.”

— Sridhar Acharya, Managing Director
Millworks Technologies · financial snapshot
Share price₹737.35
Market capitalisation₹1,298.83 Cr
Revenue (annual)₹148.77 Cr
Net profit (annual)₹37.06 Cr
P/E (TTM)35.04×Sector 50.8×
Promoter holding47.18%
FII holding1.52%Current quarter

Reference market data from a third-party provider, as of the story. Not a valuation or a recommendation.

Source verified

Earnings call transcript and H1 FY27 results filed by Millworks Technologies Ltd. Market figures from a third-party data provider.

Read the filing ↗
Every Millworks Technologies announcement on ALFA FilingsSee filings →

More in Results & Earnings

All →